Skip to main content

GENESIS BUILT-IN CAMGENESIS BUILT-IN CAM

Through Genesis built-in cam, you can review recorded videos on the navigation screen and your smartphone.Through Genesis built-in cam, you can review recorded videos on the navigation screen and your smartphone.

GENESIS BUILT-IN CAM

2-CHANNEL CAMERA2-CHANNEL CAMERA

You can get high-quality videos with built-in cameras at the front and rear of the vehicle.

GENESIS BUILT IN CAM

LINK WITH 14.5" NAVIGATION SCREENLINK WITH 14.5" NAVIGATION SCREEN

You can review recorded video through 14.5" navigation screen.

GENESIS BUILT-IN CAM

LINK WITH YOUR SMARTPHONELINK WITH YOUR SMARTPHONE

The built-in cam app allows you to play, download, edit and share your recorded videos.

GENESIS BUILT-IN CAM

TIME LAPSETIME LAPSE

Your everyday moments and cinematic scenes from your journey can be shown with the built-in cam.

SMARTPHONE CONNECTION

1. Connect with a USB cable
Connect your smartphone to the built-in cam using a USB cable.
Change the usage of ‘USB tethering’ on your smartphone's settings.

※ Android smartphones can be connected via a Wi-Fi dongle and a USB cable, and iOS smartphones can be connected via a Wi-Fi dongle.

2. Connect with a Wi-Fi Dongle
Connect the Wi-Fi dongle to the built-in Cam USB port.
Select the network name (SSID) to connect from the list on your smartphone Wi-Fi settings.

※ To check the supported WiFi dongles, select the 'Built-in Cam' from the infotainment system home screen, and refer to 'Smartphone Connection' → 'Supported WiFi Dongles'
The WiFi dongle needs to be purchased individually, and our company does not guarantee the quality of WiFi dongle.

Check the vehicle built-in cam USB port location on the navigation screen.
Connect the USB cable to the built-in Cam USB port.
Select the [USB] button on the built-in cam app home screen or the setting screen. Change the settings on the smartphone 'USB tethering' setting screen.
After completing the setup, you can go to the built-in cam app and check the connection status.

Check the vehicle built-in cam USB port location on the navigation screen.
Connect the Wi-Fi dongle to the built-in cam USB port.
Select the [Wi-Fi] button on the built-in cam app home screen or the setting screen.
Select the network name (SSID) to connect to from list on your smartphone Wi-Fi settings.
After completing the setup, you can go to the built-in cam app and check the connection status.

※ If the previous password is registered on the smartphone settings, the connection may fail. If this occurs, delete the connection settings and try again.
HOW TO USE TIME LAPSE

Press [Time Lapse] on the navigation or press the manual record button above the head for more than 3 seconds to start recording Time Lapse. The recording length varies depending on the setting, and up to 8 time-lapse videos can be saved.

GENESIS BUILT-IN CAM MANUAL